Z-Upgrade 3.2c SFU1605 + REINFORCED ARMS Edition

Adaptation of the production grade "Z-Upgrade" for VCORE 4.0 with steel rod reinforced arms

Upgrade to replace the original Z with a ballscrew system.

More precise, very reliable over time, offers a very high repeatability in the Z movement compared to a trapezoidal screw.

Maintenance-free*. Made to last in a production line. No wobble over Z. Proofed design over 2021. More than 350+ users since 2021.

Lifetime Support

A lot of things has been reworked on this iteration compare to the previous Z-Upgrade 2.0:

• Simplification of parts list, easier implementation. direct bolt in upgrade.
• Directly bolted to the VCORE 4.0 frame and underplate. Re-use the Stock VC4 top retainers + bearings.
• No need of surelevation; the Stock VC4 feet will only need to be adjusted to the height. (+17mm)
• Compatible natively with Wobble X, Oldham V3 proofed printed rings compatible too
• Dense integration of the Oldham/Wobble X in the Arms
• Motor reduction for a very high holding torque, even when the motor aren't active. Proofed for heavy future custom bed, or bigger custom print volume machines. Vcore 500 can now run standard Nema 17 without risks of fall when the motor are powered off
• Motor reduction + ballscrew allowing an insane precision over the Z-Motion, extreme constistencies, allow thin and repetable layer over time
• No maintenance needed (cleaning+thin lubrication once a year is enough)
• Z-motors easy tension over the 6mm timing belt with 1x M6 screw
• Add +10mm of Z distance (Oldham V3), or +15mm with Wobble X
• All included, no self soucing to do.
• SFU1605 version for Larger machine

What is included in the kit:

This kit is only made with WS16 WobbleX since reinforcement is what we are looking for here

Manual

BOM

STEP/STL/F3z files Available on the GITHUB or on Printable

ONLY for VCORE 4.0 CORE XY and HYBRID CORE XY

Kit printed in PA12CF15 Carbon-Fiber Pa12 Nylon (Fiberlogy PA12+CF15, long fibers, Technical datasheet details)

The Z-Upgrade fit exactly like the stock Z-System volume, it is then fully compatible with IDEX and VAOC

Under license CC-BY-NC

IF YOU WANT TO GET A SPECIFIC VERSION OF THE Z-UPGRADE TO FIT YOUR NEEDS, JUST ASK ME, PRICE WILL REMAIN THE SAME.

Credits: 

-@Ratrig for the VCORE-4.0 amazing design

-@MirageC / EVOMOTO Oldham/Wobblex magical design