1.5GT belt HT

-POWDGE GT1.5 belts EPDM High temperature (-45°C +135°C)

-GATES POWERGRIP® GT1.5 belts standard

1.5mm tooth pitch, can be used to drastically lower VFA on printed parts

Each unit is 1m, if you need for exemple 6m add 6x in your cart.

Remember the max length is 10mm per belts so if you need more, 2 separate belts will be provided (ex; you need 14m, you will get 1x10m + 1x4m)

IN ORDER FOR THIS BELT TO BE INSTALLED, YOU NEED A GT1.5 PULLEY AND TOOTHED IDLER LAYOUT, Check you setup before

Here some exemples for Vcore machines:

VCORE 300 - 4.2m

VCORE 400 - 5.0m

VCORE 500- 5.8m